freiberufler Elektrokonstrukteur EPLAN / SPS und Automatisierungstechnik auf freelance.de

Elektrokonstrukteur EPLAN / SPS und Automatisierungstechnik

offline
  • auf Anfrage
  • 72 000 Zenica
  • auf Anfrage
  • bs  |  sr  |  hr
  • 30.12.2023

Kurzvorstellung

SPS & SCADA Programmer/ Elektroplaner / Eplan Konstruktor/

Auszug Referenzen (6)

"Zehr gute Zusammenarbeit, gute technische Verständnisse."
ePlan Design ,PLC programming-S7 1200 + Servo V90 and Commissioning
Laris Babic
Tätigkeitszeitraum

6/2022 – 2/2023

Tätigkeitsbeschreibung

Materialdosierung mit dem servo v90 System...

Eingesetzte Qualifikationen

EPLAN (allg.), Motion, Totally integrated automation portal (TIA portal)

"The work was done professionally and on time..."
ePlan Design ,PLC programming and Commissioning -Veneer dryer
Adis Mujić
Tätigkeitszeitraum

8/2021 – 10/2021

Tätigkeitsbeschreibung

ePlan design ,PLC programming and Commissioning. Control system is based on SIMATIC S7 1500 CPU, KTP 900, Schneider Electric , Mitsubishi, Siemens drives , encoders on PROFINET...

Eingesetzte Qualifikationen

Autodesk AutoCAD (allg.), EPLAN (allg.), Totally integrated automation portal (TIA portal)

"Excelent job, everything ok."
ePlan Design ( Rittal PLS 1600) ,PLC programming and Commissioning -Pump Station
Ahmet Hrustić
Tätigkeitszeitraum

7/2020 – 4/2022

Tätigkeitsbeschreibung

ePlan design ( Rittal PLS 1600 , 8 x Rittal Cabinets on Main Power + 2 x Rittal Cabinet on Generator + PLC Cabinet + Compensation, PLC programming and Commissioning. Control system is based on SIMATIC S7 1515 CPU + ET200 sp, KTP 900, Sinamics drives ...

Eingesetzte Qualifikationen

Autodesk AutoCAD (allg.), EPLAN (allg.), Totally integrated automation portal (TIA portal)

"Project excellent execution."
PLC programming and Commissioning -Portal Kratzer
Kundenname anonymisiert
Tätigkeitszeitraum

6/2020 – 12/2020

Tätigkeitsbeschreibung

PLC programming and Commissioning. Control system is based on SIMATIC S7 1500 CPU, KTP 1500, Sinamics drives ...

Eingesetzte Qualifikationen

EPLAN (allg.), Totally integrated automation portal (TIA portal)

"Posao koji je radio [...] [...] je profesionalno urađen. [...] je pustio u rad dvije peći Junker 2x6T bez problema."
Programming and commissioning SPS
Kundenname anonymisiert
Tätigkeitszeitraum

10/2018 – 1/2019

Tätigkeitsbeschreibung

Furnace cooling system-Željezara Ilijaš
-PLC & HMI programming (S7-1200)
-design of WinCC based SCADA system
-commissioning

Eingesetzte Qualifikationen

Speicherprogrammierbare Steuerung (SPS)

"The project was completed according to the agreement and professionally..."
ePlan Plannung
Adis Mujić
Tätigkeitszeitraum

3/2018 – 9/2018

Tätigkeitsbeschreibung

Schaltplanerstellung und Projektierung mit EPLAN Electric P8-Holzbearbeitungsmaschine und Holztrockner (S7 1200/1500 Frequenzumrichtern V20...

Eingesetzte Qualifikationen

EPLAN (allg.)

Qualifikationen

  • EPLAN (allg.)
  • Gebäudeautomation (GA)
  • Motion
  • Projekt-Dokumentation
  • Simaris Design
  • Speicherprogrammierbare Steuerung (SPS)
  • STEP 7
  • Totally integrated automation portal (TIA portal)
  • WinCC
  • XWorks , ABT Site

Projekt‐ & Berufserfahrung

ePlan Design ,PLC programming-S7 1200 + G120C+ 5x Servo V90 and Commissioning
Zenimatik d.o.o. Zenica, Sarajevo
6/2022 – 6/2023 (1 Jahr, 1 Monat)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

6/2022 – 6/2023

Tätigkeitsbeschreibung

Konstruktion, Programmierung und Inbetriebnahme der Maschine zur Bearbeitung von Metallrohren. Das System basiert auf S7 1200 + G120C + 5x Servo v90 ... zwei Brennern...

Eingesetzte Qualifikationen

EPLAN (allg.), Gas-, Wasserinstallation, Motion, Totally integrated automation portal (TIA portal)

ePlan Design ,PLC programming-S7 1200 + Servo V90 and Commissioning
Zenimatik d.o.o. Zenica, Sarajevo
6/2022 – 2/2023 (9 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

6/2022 – 2/2023

Tätigkeitsbeschreibung

Materialdosierung mit dem servo v90 System...

Eingesetzte Qualifikationen

EPLAN (allg.), Motion, Totally integrated automation portal (TIA portal)

XWorks programming , commissioning
University Clinical Center Sarajevo, Sarajevo
1/2022 – 4/2022 (4 Monate)
Gesundheitswesen
Tätigkeitszeitraum

1/2022 – 4/2022

Tätigkeitsbeschreibung

Supervision and control over the operation of the transformer station of the clinical center, remote control of switches, connection of the operation status of all generators . Reading of modbus data from the generators. XWorks ( PXC 100 E - D , PXC 001 E -D )

Eingesetzte Qualifikationen

Gebäudeautomation (GA)

ABT Site - XWorks programming - Commissioning
ASA Sarajevo Hospital, Sarajevo
1/2022 – offen (2 Jahre, 3 Monate)
Gesundheitswesen
Tätigkeitszeitraum

1/2022 – offen

Tätigkeitsbeschreibung

Programming and commissioning more than 40 air conditioning chambers (AHU unit with regulation of temperature, pressure, humidity...). Management of boiler rooms, heating and cooling substations, connection of room RDG200 KN thermostats, connection of VAV regulators via KNX for overpressure control in rooms, connection of power switch status via ModBus TCP / IP, ventilation management for smoke and fire. Work on PXC 4 (ABT site) + HMI panel PXM 30-40, PXC 100-200-001 E-D (XWorks), work in ETS (KNX) ...preparation for Desigo CC.

Eingesetzte Qualifikationen

Gebäudeautomation (GA)

ePlan Design ,PLC programming and Commissioning -Brass Washers:
Zenimatik d.o.o. Zenica, Zenica
10/2021 – 1/2022 (4 Monate)
Maschinen-, Geräte- und Komponentenbau
Tätigkeitszeitraum

10/2021 – 1/2022

Tätigkeitsbeschreibung

ePlan design ,PLC programming and Commissioning. Control system is based on SIMATIC S7 1200 CPU, KTP 400, Siemens drives G120C...
- Controlled by PLC SIEMENS 1215C, program and recipe controll,
- Frequency controlled rotation speed with SINAMICS G120C & V20 and SIEMENS SIMOGEAR,
- 4 inch color HMI SIEMENS KTP400,
- PID control of temperature of water, acid, soap, dry air,
- Modular design - any combination of modules can be achieved,
- Heating of liquids in modules, 22 kW on 230 VAC, up to 80 C,
- Drying chamber power is 26 kW on 230 VAC, max 150 C,
- Water magnet valves 1/2 inch, 24 VDC - for automatic water level regulation and control,
- Hot air fan for drying chamber, DOL,
- Two different drum diameter, 600 and 900 mm,
- Material AISI 304 and 316L,
- Networked over second ethernet port of PLC,
- Optional visualisation in controol room over WinCC 7.5,
- Control desk RITTAL,
- Optional external cover,
- Delivery in one peces (except command desk and cables).

Eingesetzte Qualifikationen

EPLAN (allg.), Totally integrated automation portal (TIA portal)

ePlan Design ,PLC programming and Commissioning -Veneer dryer
Palavra d.o.o. Vitez, Vitez
8/2021 – 10/2021 (3 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

8/2021 – 10/2021

Tätigkeitsbeschreibung

ePlan design ,PLC programming and Commissioning. Control system is based on SIMATIC S7 1500 CPU, KTP 900, Schneider Electric , Mitsubishi, Siemens drives , encoders on PROFINET...

Eingesetzte Qualifikationen

Autodesk AutoCAD (allg.), EPLAN (allg.), Totally integrated automation portal (TIA portal)

XWorks programming , commissioning
Sarajevo International Airport, Sarajevo
1/2021 – 5/2023 (2 Jahre, 5 Monate)
Airport
Tätigkeitszeitraum

1/2021 – 5/2023

Tätigkeitsbeschreibung

Programming in XWorks and commissioning of over 30 air conditioning systems (AHU units) on PXC 100 E-D, PXC 200 E-D, PXC36.E-D..., several heating and cooling substations, RDG100 and RDG200 KN thermostat management, KNX and modbus connection of other devices and preparation for Desigo CC.

Eingesetzte Qualifikationen

Gebäudeautomation (GA)

Modification -Gannomat Index 125 ( ePlan, TIA , Servo...)
Bosna Wood Vitez ( Zenimatik d.o.o. Zenica), Vitez
1/2021 – 5/2021 (5 Monate)
Maschinen-, Geräte- und Komponentenbau
Tätigkeitszeitraum

1/2021 – 5/2021

Tätigkeitsbeschreibung

Modification and switching to new equipment machine Gannomat Index 125 . ePlan design, PLC programming and Commissioning. Control system is based on SIMATIC S7 1500 CPU, Servo drive S210 on PROFINET...

Eingesetzte Qualifikationen

Autodesk AutoCAD (allg.), EPLAN (allg.), Totally integrated automation portal (TIA portal)

ePlan Design ( Rittal PLS 1600) ,PLC programming and Commissioning -Pump Station
Heidelberg Cement Kakanj, Kakanj
7/2020 – 4/2022 (1 Jahr, 10 Monate)
Maschinen-, Geräte- und Komponentenbau
Tätigkeitszeitraum

7/2020 – 4/2022

Tätigkeitsbeschreibung

ePlan design ( Rittal PLS 1600 , 8 x Rittal Cabinets on Main Power + 2 x Rittal Cabinet on Generator + PLC Cabinet + Compensation, PLC programming and Commissioning. Control system is based on SIMATIC S7 1515 CPU + ET200 sp, KTP 900, Sinamics drives ...

Eingesetzte Qualifikationen

Autodesk AutoCAD (allg.), EPLAN (allg.), Totally integrated automation portal (TIA portal)

3 x Electrical furnace (3 Zone) for recrystallization of brass
Zenimatik d.o.o. Zenica, Zenica
6/2020 – 9/2021 (1 Jahr, 4 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

6/2020 – 9/2021

Tätigkeitsbeschreibung

ePlan designing , PLC programming and Commissioning. Control system is based on SIMATIC S7 1500 CPU, HMI KTP 900 ,on PROFINET...

Eingesetzte Qualifikationen

EPLAN (allg.), Totally integrated automation portal (TIA portal)

PLC programming and Commissioning -Portal Kratzer
Heidelberg Cement Kakanj, Kakanj
6/2020 – 12/2020 (7 Monate)
Maschinen-, Geräte- und Komponentenbau
Tätigkeitszeitraum

6/2020 – 12/2020

Tätigkeitsbeschreibung

PLC programming and Commissioning. Control system is based on SIMATIC S7 1500 CPU, KTP 1500, Sinamics drives ...

Eingesetzte Qualifikationen

EPLAN (allg.), Totally integrated automation portal (TIA portal)

ePlan Design , PLC programming ( Desigo XWorks ) and Commissioning
Amsal Pharmaceuticals, Sarajevo
6/2020 – 9/2020 (4 Monate)
Prozessindustrie
Tätigkeitszeitraum

6/2020 – 9/2020

Tätigkeitsbeschreibung

Modification of the control system for air conditioning systems (AHU units) for storage and packaging space. Siemens Desigo PXC controller programming and commissioning.

Eingesetzte Qualifikationen

Gute Herstellungspraxis (GMP), Speicherprogrammierbare Steuerung (SPS)

ePlan Design ,PLC programming-Climatix and Commissioning
SARAJEVOFARM ( Tuzla-farm Veledrogerija ), Sarajevo
5/2020 – 2/2021 (10 Monate)
Prozessindustrie
Tätigkeitszeitraum

5/2020 – 2/2021

Tätigkeitsbeschreibung

Design of distribution control cabinets for air conditioning systems (AHU units) for storage and packaging space, heating substation. Siemens Climatix controller programming and commissioning. Development of Server-Client monitoring system in WinCC 7.5 .

Eingesetzte Qualifikationen

EPLAN (allg.), Gute Herstellungspraxis (GMP), Supervisory control and data acquisition (SCADA)

XWorks programming , commissioning
Amsal Pharmaceuticals, Sarajevo
5/2020 – 9/2020 (5 Monate)
Pharma
Tätigkeitszeitraum

5/2020 – 9/2020

Tätigkeitsbeschreibung

Programming in XWorks and commissioning of two air conditioning units (AHU units) for pharmacy. Pressure management in clean rooms using VAV / CAV regulators and other systems.

Eingesetzte Qualifikationen

Pharmazie, Gebäudeautomation (GA)

PLC Programming and commissioning
Zenimatik d.o.o. Zenica, Sarajevo
9/2019 – 12/2019 (4 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

9/2019 – 12/2019

Tätigkeitsbeschreibung

Software für SIEMENS S7-1511F-1 PN geschrieben in TIA V15, Safety Advanced, Starter.
- WinCC 7.5 RT2048 mit UserArchive und Ausdruck des Protokolls über bearbeitete Chargen.
- Absenken von 5 Tonnen Aluminium mit einer konstanten Geschwindigkeit von 1,25 m/s mit Frequenzumrichter 160 kW SIEMENS G120, CU S250-2 PN Vector, Drehpositionsgeber.
- Positionierung von 5 t Material mit einer Geschwindigkeit von 1,25 m/s mit Hilfe von EPOS-Funktionen.
- 1 MW (12 x 90 kW) Heizungssteuerung über 12 AE-Thyristoren am Profibus.

Lieferung der Software, Parametrierung und Test der Winde 20 KNm mit interner und externer Bremse, Parametrierung und Test des Ofens mit 12 Zonen, Inbetriebnahme, Überprüfung der Parameter wurden durchgeführt. Positioniergenauigkeit unter 1 mm und Temperaturregelung +/- 0,1 C.

Die Parameter wurden nach AMS-Standards (Aerospace Materials Specifications) unter Verwendung von TUS-Verfahren (Temperature Uniformity Survey) mit bis zu 53 Kontroll-Thermoelementen auf einem 14,3 m langen Material nachgewiesen.

Eingesetzte Qualifikationen

SafetyBUS p, SIMATIC S7, Totally integrated automation portal (TIA portal)

Electric furnace 14 Zone ,Programming and commissioning SPSProgramming and commi
Zenimatik d.o.o. Zenica, Schwetzingen
1/2019 – 5/2019 (5 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

1/2019 – 5/2019

Tätigkeitsbeschreibung

PLC programming and Commissioning. Control system is based on SIMATIC S7 1500 CPU, WinCC 7.2 SCADA, KTP 1500, SEW drives , AEG Thyro-A on PROFINET...

Eingesetzte Qualifikationen

Totally integrated automation portal (TIA portal)

Electric furnace 3300kW ,Reprogramming and commissioning SPSProgramming
Zenimatik d.o.o. Zenica, Schwetzingen
12/2018 – 2/2019 (3 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

12/2018 – 2/2019

Tätigkeitsbeschreibung

PLC programming and Commissioning. Control system is based on SIMATIC 315-2 PN/DP CPU, WinCC 7.2 SCADA, SEW Eurodrivers , TIA Portal , AEG Thyro-S on PRFIBUS..

Eingesetzte Qualifikationen

Totally integrated automation portal (TIA portal)

Programming and commissioning SPS
Ironworks Ilijaš, Ilijaš, Sarajevo
10/2018 – 1/2019 (4 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

10/2018 – 1/2019

Tätigkeitsbeschreibung

Furnace cooling system-Željezara Ilijaš
-PLC & HMI programming (S7-1200)
-design of WinCC based SCADA system
-commissioning

Eingesetzte Qualifikationen

Speicherprogrammierbare Steuerung (SPS)

Commissioning- Induction Furnace
Ironworks Ilijaš (Željezara Ilijaš), Ilijaš, Sarajevo
10/2018 – 12/2018 (3 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

10/2018 – 12/2018

Tätigkeitsbeschreibung

Step 7 + WInCC 7.4, Commissioning on two Induction Germany Furnaces ( Type: Junker) in Ironworks Ilijaš.

Eingesetzte Qualifikationen

STEP 7, Supervisory control and data acquisition (SCADA)

Schaltplanerstellung und ePlan Projektierung , Inbetriebnahme
Sudan University of Science, Khartoum
9/2018 – 4/2019 (8 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

9/2018 – 4/2019

Tätigkeitsbeschreibung

Schaltplanerstellung und Projektierung mit EPLAN Electric P8-Presse 560 T , 200T für Sudan University of Science and Technology. Inbetriebnahme beim Kunden.

Eingesetzte Qualifikationen

Totally integrated automation portal (TIA portal), Speicherprogrammierbare Steuerung (SPS)

Electric furnace 1100kW ,Programming and commissioning SPSProgramming and commis
Zenimatik d.o.o. Zenica, Schwetzingen
8/2018 – 11/2018 (4 Monate)
Dienstleistungsbranche
Tätigkeitszeitraum

8/2018 – 11/2018

Tätigkeitsbeschreibung

PLC programming and Commissioning: Control system is based on SIMATIC 315-2 DP CPU, WinCC 7.2 SCADA, KTP 1500, AEG Thyro...

Eingesetzte Qualifikationen

Totally integrated automation portal (TIA portal)

Electric furnace ,Programming and commissioning SPS
Kundenname anonymisiert, Goražde
8/2018 – 10/2018 (3 Monate)
Automobilindustrie
Tätigkeitszeitraum

8/2018 – 10/2018

Tätigkeitsbeschreibung

PLC programming and Commissioning-Electrical Furnace 50kW , 3 Zone
PLC programming and Commissioning: Control system is based on SIMATIC S71200 , KTP 1200 , SINAMICS V20 drives...

Eingesetzte Qualifikationen

Totally integrated automation portal (TIA portal)

Programming and commissioning BMS
Hotel "Ruža" Mostar, Mostar
4/2018 – offen (6 Jahre)
Wohnungswirtschaft
Tätigkeitszeitraum

4/2018 – offen

Tätigkeitsbeschreibung

Programming and commissioning of the control-system for the office-building Hotel Ruža
Apr 2018

Project descriptionprogramming and commissioning of Desigo PX automation station PLCs
-programming and commissioning of a KNX thermostat surveillance and control system (integration with Desigo)
-programming and commissioning of a MODBUS based surveillance and control system for VAV controllers (integration with Desigo)
-HVAC Controls Systems Automation

Eingesetzte Qualifikationen

Projekt-Dokumentation, Speicherprogrammierbare Steuerung (SPS)

ePlan Plannung
Palavra Vitez, VItez
3/2018 – 9/2018 (7 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

3/2018 – 9/2018

Tätigkeitsbeschreibung

Schaltplanerstellung und Projektierung mit EPLAN Electric P8-Holzbearbeitungsmaschine und Holztrockner (S7 1200/1500 Frequenzumrichtern V20...

Eingesetzte Qualifikationen

EPLAN (allg.)

Programming and commissioning SPS
Mushroom Factory Mostar, Mostar
2/2018 – 11/2018 (10 Monate)
Konsumgüterindustrie
Tätigkeitszeitraum

2/2018 – 11/2018

Tätigkeitsbeschreibung

Programming and commissioning of the control-system for Mushroom Factory Mostar

Project description-PLC & HMI programming (Climatix POL687 ; Boiler Room automation ; HVAC Controls Systems
automation)
-commissioning

Eingesetzte Qualifikationen

Speicherprogrammierbare Steuerung (SPS), Klimaanlage / Klimatechnik

Programming and commissioning (SoMachine Basic)
State Prison Sarajevo, Sarajevo
1/2018 – 1/2019 (1 Jahr, 1 Monat)
Öffentliche Verwaltung
Tätigkeitszeitraum

1/2018 – 1/2019

Tätigkeitsbeschreibung

Programming and commissioning over 10 heating substations, HVAC systems, air-conditioning and other systems. The whole system is based on Schneder Electric PLC (Modicon - SoMachine Basic).

Eingesetzte Qualifikationen

Heiztechnik / Wärmetechnik, Klimaanlage / Klimatechnik

Programming and commissioning SPS
Wasserversorgung und Kanalisation Sarajevo, Kalesi, Sarajevo
1/2018 – 1/2019 (1 Jahr, 1 Monat)
Öffentliche Verwaltung
Tätigkeitszeitraum

1/2018 – 1/2019

Tätigkeitsbeschreibung

Pumping station for the Public water supply-Bjelašnica , Kalesija, Zenica

Project description-PLC & HMI programming (S7-1200 ; G120 ; KTP 700)
-commissioning

Eingesetzte Qualifikationen

Totally integrated automation portal (TIA portal), Speicherprogrammierbare Steuerung (SPS)

Programming and commissioning BMS
UNION Bank office building in Sarajevo, Sarajevo
1/2018 – 4/2018 (4 Monate)
Öffentliche Verwaltung
Tätigkeitszeitraum

1/2018 – 4/2018

Tätigkeitsbeschreibung

UNION Bank office building in Sarajevo

Project description-programming and commissioning of Desigo PX automation station PLCs
-programming and commissioning of a KNX thermostat surveillance and control system (integration with Desigo)
-programming and commissioning of a MODBUS based surveillance and control system for VAV controllers (integration with Desigo)

Eingesetzte Qualifikationen

Speicherprogrammierbare Steuerung (SPS), Klimaanlage / Klimatechnik

Programming and commissioning SPS
Wasserversorgung und Kanalisation VIK Sarajevo, Sarajevo
12/2017 – 6/2018 (7 Monate)
Öffentliche Verwaltung
Tätigkeitszeitraum

12/2017 – 6/2018

Tätigkeitsbeschreibung

Automation of the Wastewater treatment plant-Butile Sarajevo

Project descriptionAutomation of the Aeration system, CHP generator and other systems :
-PLC & HMI programming (S7-1500 ; S7-1200 ; Profinet ; Modbus)
-design of WinCC based SCADA system
-commissioning

Eingesetzte Qualifikationen

Sanctioned Party Screening (SPS)

Programming and commissioning SPS
Wasserversorgung und Kanalisation Mostar, Mostar
9/2017 – 1/2019 (1 Jahr, 5 Monate)
Öffentliche Verwaltung
Tätigkeitszeitraum

9/2017 – 1/2019

Tätigkeitsbeschreibung

Automation of the Wastewater treatment plant in Mostar
Project description-PLC & HMI programming (S7-1500 ; S7-1200 ; Profinet ; Profibus)
-design of WinCC based SCADA system
-commissioning

Eingesetzte Qualifikationen

Speicherprogrammierbare Steuerung (SPS)

ePlan project- PLC programming and Commissioning
Eisenwerk UNIS Tok Kalesija, Kalesija
1/2017 – 6/2017 (6 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

1/2017 – 6/2017

Tätigkeitsbeschreibung

ePlan project- PLC programming and Commissioning-Furnace 380kW Kalesija
Project descriptionePlan project- PLC programming and Commissioning. Control system is based on SIMATIC 315-2 DP CPU, WinCC 7.4 SCADA, WinCC flexible, 6 SINAMICS V20 drives on 6 SIMOGEARs, STEP7.

Scope of Termomatik supply: Automation system projecting in EPLAN P8, installing, testing, supervision, startup,

mechanical and hydraulical engineering, production, errection and startup. Total power 380 kW.

Eingesetzte Qualifikationen

STEP 7, Speicherprogrammierbare Steuerung (SPS)

Pharmaceutical Maintenance Engineer
Bosnalijek d.d. Sarajevo, Sarajevo
3/2016 – 9/2017 (1 Jahr, 7 Monate)
Pharmaceutical
Tätigkeitszeitraum

3/2016 – 9/2017

Tätigkeitsbeschreibung

Maintenance and repair of different types of machines in pharmacy. Calibration and validation of systems and equipment. GMP education.
Work on systems : Water purification systems, blister packaging machines, preparation of preparations, tablets, air conditioning systems...
Reconditioning and commissioning of machinery for packaging pills in the bottle ( S7 300 & WinCC Flexible)

Eingesetzte Qualifikationen

EPLAN (allg.), Gute Herstellungspraxis (GMP), STEP 7

Elektroplaner / Eplan Konstruktor
ArcelorMittal Zenica, Zenica
8/2014 – 12/2014 (5 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

8/2014 – 12/2014

Tätigkeitsbeschreibung

SALEM OFEN-Konstruktion elektrotechnischer Komponenten und Systeme;Erstellung und Bearbeitung von Stromlaufplänen in ePlan P8; Anfertigung von Detailzeichnungen und Dokumentationen Erstellung von Kabellisten, Klemmenplänen, Schaltplänen und Stücklisten;Hardwareplanung;

Eingesetzte Qualifikationen

Autodesk AutoCAD (allg.), EPLAN (allg.)

Eplan Konstruktor-Logo Programm-Inbetriebnahme
Wärmekraftwerk Kakanj, Kakanj
3/2014 – 5/2014 (3 Monate)
Wärmekraftwerk
Tätigkeitszeitraum

3/2014 – 5/2014

Tätigkeitsbeschreibung

Automatische Schmierung für zwei Förderband- Konstruktion, Logo Programm und Inbetriebnahme der Software automatische Schmierung.

Konstruktion elektrotechnischer Komponenten und Systeme;Erstellung und Bearbeitung von Stromlaufplänen in ePlan P8; Anfertigung von Detailzeichnungen und Dokumentationen Erstellung von Kabellisten, Klemmenplänen, Schaltplänen und Stücklisten;Hardwareplanung; Programmerstellung in LOGO,Inbetriebnahme

Eingesetzte Qualifikationen

Speicherprogrammierbare Steuerung (SPS), EPLAN (allg.)

Elektroplaner / Eplan Konstruktor/SPS Programmer/Inbetriebnahme
ArcelorMittal Zenica, Zenica
2/2014 – 6/2014 (5 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

2/2014 – 6/2014

Tätigkeitsbeschreibung

Plannung, Konstruktion ,Software und Inbetriebnahme von zwei Systeme für die Automatische Schmierung in Arcelor Mittal, Stahlwerk-Abteilung.

Eingesetzte Qualifikationen

Totally integrated automation portal (TIA portal), Inbetriebnahme (allg.), Speicherprogrammierbare Steuerung (SPS), EPLAN (allg.)

Eplan Konstruktor/TIA Programmer
LPG Ofen Sudan, Zenica
9/2013 – 6/2014 (10 Monate)
Hochschulen und Forschungseinrichtungen
Tätigkeitszeitraum

9/2013 – 6/2014

Tätigkeitsbeschreibung

Die Teilnahme an der Entwicklung des Projekts (el.Schema) für die Herstellung von Öfen. TIA Programm & HMI (SCADA) in TIA Portal für Überwachung und Verwaltung der gleiche.

Eingesetzte Qualifikationen

Totally integrated automation portal (TIA portal), EPLAN (allg.)

Ausbildung

Master Elektrotechnik-Fakultät für Elektrotechnik
Abteilung für Automatisierung und Elektronik-Universität Sarajevo
2013
Sarajevo

Über mich

Ehrlich , Zuverlässig ,Kritik annehmen, Ehrgeizig
Personal anleiten, führen und motivieren

Persönliche Daten

Sprache
  • Bosnisch (Muttersprache)
  • Serbisch (Fließend)
  • Kroatisch (Fließend)
  • Deutsch (Gut)
  • Englisch (Gut)
Reisebereitschaft
auf Anfrage
Home-Office
unbedingt
Profilaufrufe
4409
Alter
33
Berufserfahrung
10 Jahre und 6 Monate (seit 09/2013)
Projektleitung
1 Jahr

Kontaktdaten

Nur registrierte PREMIUM-Mitglieder von freelance.de können Kontaktdaten einsehen.

Jetzt Mitglied werden