freiberufler SPS und Roboter Programmierer, Inbetriebnehmer, auf freelance.de

SPS und Roboter Programmierer, Inbetriebnehmer,

offline
  • auf Anfrage
  • 41200 Sosnowiec
  • Weltweit
  • pl  |  en  |  de
  • 20.01.2023

Kurzvorstellung

• Programming Siemens PLC
• Programming and configuring robots: ABB, KUKA, FANUC, KAWASAKI, MOTOMAN, EPSON SCARA
• Programming HMI panels: Siemens

Qualifikationen

  • Automatisierungstechnik (allg.)
  • Projektleitung / Teamleitung
  • Projektmanagement
  • Robotik / Robotertechnik
  • SIMATIC S7
  • STEP 7
  • Technische Projektleitung / Teamleitung
  • Technisches Projektmanagement
  • Totally integrated automation portal (TIA portal)

Projekt‐ & Berufserfahrung

Project Manager, leader of PLC/ Robot programmers
Scania Sweden, 15132
6/2019 – 9/2020 (1 Jahr, 4 Monate)
Automobilindustrie
Tätigkeitszeitraum

6/2019 – 9/2020

Tätigkeitsbeschreibung

Assembly line for new transmission line.
• PLC: S7-1500F/ HMI panel:TP1500/ TIA V15.1/ Profinet/ Sinamics S120 / Siemens RFID / Bosch tightening system / Tox press system / Comeg measure system / ABB Robot / Cognex Cameras and Scanners
• Working as Project Manager. Planning resources/ hotels/ travels. Leader of group 13 PLC programmers + 2 Robot programmers, contact person with end customer (Scania) + contact with mechanic/electric leaders. Checking status of stations, responsible for commissioning of 21 automatic station + 6 transport zones
• Creating, developing PLC/ HMI / Robot standard code regarding to request from client side. Preparing master station for test.
• Checking, writing PLC code for all stations in project.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), Totally integrated automation portal (TIA portal), Speicherprogrammierbare Steuerung (SPS), Robotik / Robotertechnik

Project Manager, leader of PLC/ Robot programmers
VW, 38226
2/2019 – 11/2019 (10 Monate)
Automobilindustrie
Tätigkeitszeitraum

2/2019 – 11/2019

Tätigkeitsbeschreibung

- Assembly line for new VW crankshaft.
• PLC: S7-1500F/ HMI panel:TP1500/ TIA V15/ Profinet/ Sinamics S120 / Siemens RFID / Apex tightening system / Kistler press system / Kistler measure system/ Triumph Laser / / KUKA Robot / Cognex Cameras and Scanners
• Working as Project Manager. Planning resources/ hotels/ travels. Leader of group 6 PLC programmers + 1 Robot programmers, contact person with end customer (VW) + contact with PLC Standard programmer, mechanic/electric leaders. Checking status of stations, responsible for commissioning of 15 automatic station + 2 transport zones + 10 manual stations
• Automatic station pressing and pick and place parts from pallet. Writing PLC code and making visualization in TIA Portal, commissioning and optimization.
• Automatic station Crankshaft lubricate. Writing PLC code and making visualization in TIA Portal, commissioning and optimization.
• Automatic station pressing caps working with 2 Kuka robots. Writing PLC code and making visualization in TIA Portal, commissioning and optimization.
• Semi automatic station pressing O- ring, DMC scanning. Writing PLC code and making visualization in TIA Portal, commissioning and optimization.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), Totally integrated automation portal (TIA portal), Speicherprogrammierbare Steuerung (SPS), Robotik / Robotertechnik

Project Manager, leader of PLC/ Robot programmers
VW, 59101
1/2018 – 12/2019 (2 Jahre)
Automobilindustrie
Tätigkeitszeitraum

1/2018 – 12/2019

Tätigkeitsbeschreibung

- Assembly line for new VW engine.
• PLC: S7-1500F/ HMI panel:TP1200/ TIA V14/ Profinet/ Sinamics S120 / Balluff RFID / Apex tightening system / Kistler press system / Kistler measure system/ Promess measure system / Balluff IO Link/ KUKA Robot
• Working as Project Manager. Planning resources/ hotels/ travels. Leader of group 9 PLC programmers + 2 Robot programmers, contact person with end customer (VW) + contact with PLC Standard
programmer, mechanic/electric leaders. Checking status of stations, responsible for commissioning of 32 automatic station + 3 transport zones + communication with 100 manual stations.
• Automatic station KWLD tightening and KW measuring. Writing PLC code and making visualization in TIA Portal, commissioning and optimization.
• Automatic station KKD tightening. Writing PLC code and making visualization in TIA Portal, commissioning and optimization.
• Automatic station AGW tightening and setup OT. Writing PLC code and making visualization in TIA Portal, commissioning and optimization.
• Automatic station SILLK and NA tightening. Writing PLC code and making visualization in TIA Portal, commissioning and optimization.
• Automatic station rotating and measure engine cylinders. Writing PLC code and making visualization in TIA Portal, commissioning and optimization.
• Automatic pressing station with 3 robots. Writing PLC code and making visualization in TIA Portal, commissioning.
• Optimization and reduce cycle time for stations

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), Totally integrated automation portal (TIA portal), Speicherprogrammierbare Steuerung (SPS), Robotik / Robotertechnik

Control Engineer + responsible for PLC standard.
Kundenname anonymisiert, 41200
8/2017 – 12/2017 (5 Monate)
Automobilindustrie
Tätigkeitszeitraum

8/2017 – 12/2017

Tätigkeitsbeschreibung

Welding cells x2
• PLC: S7-1500F/ HMI panel: KP1200/ ABB robots/ Fronius welding system/ Profinet
• Writing new standard for PLC and HMI for welding cell station in TIA Portal V13. Welding cell has possibility to use 6 tables, with 10 different matrix. On each matrix is maximum 16 jigs. Every jig has maximum 16 valves. 1 valve has maximum 16 cylinders. Is possibility to mix tables with matrix, select/deselect tables or jigs. In welding cell can be installed up to 9 robots. This standard is base for welding cell where is 2 tables, 8 matrix with up to 10 jigs, 3 ABB robots.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), Totally integrated automation portal (TIA portal), Speicherprogrammierbare Steuerung (SPS)

Control Engineer & Responsible for recommissioning assembly line on site
Kundenname anonymisiert, 68190
9/2016 – 12/2017 (1 Jahr, 4 Monate)
Automobilindustrie
Tätigkeitszeitraum

9/2016 – 12/2017

Tätigkeitsbeschreibung

-Automatic station: pressing seal and bearings, greasing, marriage shafts with cover
PLC: S7-300/ HMI panel: KP1200/ Sinamics servomotors/ ABB robot/ Kistler press system/ IFM cameras/ SICK Scanner/ Profinet/ Profibus
Writing PLC code in STEP7 and making visualization in TIA Portal, commissioning and optimalization.

-Automatic station: measuring transmission to select shims
PLC: S7-300/ HMI panel: KP1200/ Bosch Nutrunner/ Sinamics servomotors/ PME measuring system/ Profinet/ Profibus
Writing PLC code in STEP7 and making visualization in TIA Portal after mechanic modification, creating strategy for special measuring cycles, commissioning and optimization

-Semi- auto station: installing cover caps on transmission
PLC: S7-300/ HMI panel: KP1200/ Keyence sensors/ Profinet/ Profibus
Writing PLC code in STEP7 and making visualization in TIA Portal, commissioning and optimization.

-Automatic station: leak test
PLC: S7-300/ HMI panel: KP1200/ Bosch Nutrunner/ JWFroehlich Leak Test/ Profinet/ Profibus
Writing PLC code in STEP7 and making visualization in TIA Portal after mechanic modification, commissioning and optimization.

-Transport zone
PLC: S7-300/ HMI panel: KP1200/ Profinet/ Profibus
Writing PLC code in STEP7 and making visualization in TIA Portal, creating strategy for data flow and NOK strategy, commissioning and optimization.

Automatic station: pressing 4 bearings on shafts
PLC: S7-300/ HMI panel: KP1200/ Sinamics servomotor/ Kistler press system/ Profinet/ Profibus
Writing PLC code in STEP7 and making visualization in TIA Portal after mechanic modification, commissioning and optimization.

-Automatic station: pressing seals
PLC: S7-300/ HMI panel: KP1200/ Sinamics servomotor/ Kistler press system/ Profinet/ Profibus
Writing PLC code in STEP7 and making visualization in TIA Portal, commissioning and optimalization.

-Automatic station: splashing & drag torque measuring
PLC: S7-300/ HMI panel: KP1200/ Bosch Nutrunner/ Profinet/ Profibus
Writing PLC code in STEP7 and making visualization in TIA Portal, commissioning and optimalization.

-Automatic station: pressing 2 bearings, tightening 12/14 bolts on gear
PLC: S7-300/ HMI panel: KP1200/ Bosch Nutrunner/ Sinamics servomotor/ Kistler press system/ Profinet/ Profibus
Writing PLC code in STEP7 and making visualization in TIA Portal after mechanic modification, commissioning and optimization.

-Automatic station: pressing 4 bearings
PLC: S7-300/ HMI panel: KP1200/ Sinamics servomotor/ Kistler press system/ Keyence sensors/ IFM camera/ Profinet/ Profibus
Writing PLC code in STEP7 and making visualization in TIA Portal after mechanic modification, commissioning and optimization

-Automatic station: Draining station
PLC: S7-300/ HMI panel: KP1200/ ABB robot/ Bosch Nutrunner/Profinet/ Profibus
Writing and preparing structure of PLC code in STEP7 and visualization in TIA Portal

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), Graph7, SIMATIC S7, STEP 7, Totally integrated automation portal (TIA portal), Robotik / Robotertechnik

Senior Control Engineer
Kundenname anonymisiert, 68190
7/2015 – 8/2016 (1 Jahr, 2 Monate)
Automobilindustrie
Tätigkeitszeitraum

7/2015 – 8/2016

Tätigkeitsbeschreibung

- Automatic pressing race, measuring bearings, unscrewing bolts station of differential
PLC: S7-300F/ HMI panel: Sinumerik 840D/ Robot KUKA/ RFID/ Promess press system/ Kistler sensors/ Bosh nutrunners/ PME measuring system/ Scaner Cognex/ Sinamics servomotor/ Profinet
Writing PLC code in STEP7 and making visualization in HMI PRO CS, commissioning and optimalization.

- Automatic tighteeing station of differential
PLC: S7-300F/ HMI panel: Sinumerik 840D/ RFID/ Bosh nutrunners/ Profinet
Writing PLC code in STEP7 and making visualization in HMI PRO CS, commissioning and optimalization.

- Standard for assembly line Kassel and Redford
Writing PLC code in STEP7 and making visualization in HMI PRO CS for special cycle of calibration press
Making visualization for diagnostic interface for peripheral device and panel HMI
Writing standard block for display special Q.Stop alarms and signalization on Wibond display.
Beta tester new programs and corrections for press/ measure systems and connection with Database before release update for all stations.

- Automatic pressing bearing on pinion, pressing race, measuring bearings, measuring pinion, station of differential
PLC: S7-300F/ HMI panel: Sinumerik 840D/ Robot KUKA/ RFID/ Promess press system/ Kistler sensors/ PME measuring system/ Scaner Cognex/ Camera Cognex/ Profinet
Writing PLC code in STEP7 and making visualization in HMI PRO CS, commissioning and optimalization.

- Automatic pressing, measuring pinion preload station with two robots of differential
PLC: S7-300F/ HMI panel: Sinumerik 840D/ Sinamics servomotors/ Robots KUKA/ RFID/ Promess press system/ Kistler sensors/ PME measuring system/ Profinet
Writing PLC code in STEP7 and making visualization in HMI PRO CS, commissioning and optimalization.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), SIMATIC S7, STEP 7, Graph7, Robotik / Robotertechnik

Control Engineer
Sitech Polkowice, 59100
4/2015 – 6/2015 (3 Monate)
Automobilindustrie
Tätigkeitszeitraum

4/2015 – 6/2015

Tätigkeitsbeschreibung

-Modernization of 6 semi- automatic stations for montage lock on backseats MLB
PLC: S7-1500/ HMI panel: KTP400/ Profinet/ Atlas Copco Tightening system/ Cameras Keyence IV-500/ Cognex DMC scanner/ Two- handed Banner safety system
Designing new electrical plan for stations. Managing project. Writing new PLC program, making visualization for HMI panels, configuring IV-500 Cameras, Re- configuring DMC Cognex Scanner, creating send/receive connection between PLC, MES system and IT system. Programming and making visualization in TIA V13.

- Collecting data from welding cells, point welding cells, laser cells, automatic gluing stations, manual stations to SAD system ( MES system)

Eingesetzte Qualifikationen

SAP MES, Automatisierungstechnik (allg.), SIMATIC S7, STEP 7, Totally integrated automation portal (TIA portal)

Control Engineer
Danfoss Wroclaw, 50001
1/2015 – 4/2015 (4 Monate)
Maschinen-, Geräte- und Komponentenbau
Tätigkeitszeitraum

1/2015 – 4/2015

Tätigkeitsbeschreibung

- Automatic testing station of hydraulic pump.
PLC: S7-300/ HMI panel: TP comfort/ Profibus/ Robot SCARA G10 with RC180 controller/ Measuring leak system ATEQ
Designing electric plan. Writing program for safety system Sick Flexi. Writing PLC code. Configuring and writing programs for SCARA Epson robot. Making visualization on HMI in TIA. Commissioning and optimization cycle time.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), SIMATIC S7, STEP 7, Graph7, Totally integrated automation portal (TIA portal), Robotik / Robotertechnik

Control Engineer
MINI Swindon, SN3 4PE
10/2014 – 12/2014 (3 Monate)
Automobilindustrie
Tätigkeitszeitraum

10/2014 – 12/2014

Tätigkeitsbeschreibung

- Assembly lines of doors for MINI cars.
PLC: S7-400/ Profinet/ ABB robots/ BMW standard
Optimization of ABB robots trajectory for welding, transfer, charge, gluing car doors, optimization of
PLC code, maintenance.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), SIMATIC S7, STEP 7, Graph7, Schweißtechnik / Schweißen (allg.), Robotik / Robotertechnik

Control Engineer
Kundenname anonymisiert, 48361
7/2014 – 9/2014 (3 Monate)
Automobilindustrie
Tätigkeitszeitraum

7/2014 – 9/2014

Tätigkeitsbeschreibung

- 5x welding robotics cells, one handling robotic cell
PLC: S7-300F/ HMI panel: MP277/ Profinet/Profibus/ Fanuc welding robots with SKS welding system
Configuring 10 welding robots Fanuc cooperated in pairs, writing welding programs and optimization trajectory, configuring 1 handling Fanuc robot, writing handling programs, optimization trajectory.

- 3 x automatic welding cells of steering column ( 2 left, 1 right)
PLC: S7-300F/ HMI panel: TP1200/ Profinet/Profibus/ KUKA welding robots
Writing PLC code, making communication standard between PLC and Kuka robots, making visualization standard for new type of HMI in TIA. Commissioning.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), SIMATIC S7, Totally integrated automation portal (TIA portal), Schweißtechnik / Schweißen (allg.), Robotik / Robotertechnik

Control Engineer
Sitech Polkowice, 59100
5/2014 – 6/2014 (2 Monate)
Automobilindustrie
Tätigkeitszeitraum

5/2014 – 6/2014

Tätigkeitsbeschreibung

-Automatic gluing station of seatback
PLC: S7-300/ HMI panel: TP177/ Profibus/ ASI/ RFID: Balluf/ Robot Fanuc with Nordson dosage glue system/ Cameras: Keyence IV- 500 CA
Writing new robot programs with new trajectory, programming Keyence cameras for check colors of backseat, configuring ASI protocol for devices, configuring write and read data on Baluff RFID, writing PLC code for new type of backseats.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), SIMATIC S7, STEP 7, Robotik / Robotertechnik

Control Engineer
VW Polkowice, 59100
1/2014 – 4/2014 (4 Monate)
Automobilindustrie
Tätigkeitszeitraum

1/2014 – 4/2014

Tätigkeitsbeschreibung

-Semi automatic tightening station of crankshaft.
Tightening system Atlas Copco PF 4000 Graph with ST wrench
Writing program for tightening system Atlas Copco

-Automatic screwing station of the oil pan in AGW-MDB engine
PLC: S7-300/ HMI panel: TP177/ Profibus/ Servomotors Sinamics/ RFID: MOBY/ Tightening system Cleco
Writing PLC code, configuring sinamic servomotors and tightening system Cleco, commissioning and optimalization, making visualization for HMI in WinCC.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), SIMATIC S7, STEP 7, Graph7, Kontaktplan (KOP)

Control Engineer
Sitech Polkowice, 59100
10/2013 – 10/2013 (1 Monat)
Automobilindustrie
Tätigkeitszeitraum

10/2013 – 10/2013

Tätigkeitsbeschreibung

- Robotic welding cell
PLC: S7-300/ HMI panel: TP177/ Profibus/ Interbus/ Welding robot Fanuc
New program for new type of seats

Eingesetzte Qualifikationen

SIMATIC S7, Robotik / Robotertechnik

Control Engineer
VW Polkowice, 59100
5/2013 – 12/2013 (8 Monate)
Automobilindustrie
Tätigkeitszeitraum

5/2013 – 12/2013

Tätigkeitsbeschreibung

- Automatic pressing station of the five AGW-MDB engine lids
PLC: S7-300/ HMI panel: MP277/ Profibus/ Servomotors Sinamics/ RFID: MOBY/ Dosage glue system: DoBoTech/ Measuring and press system: Kistler DMF-P A400, TOX-PESSOTECHNIK Q-K2 with force sensor 9343A and distance sensor TRS 0-50
Writing PLC code in STEP7 and making visualization in WINCC, commissioning and optimalization

- Hand pressing station of the five AGW-MDB engine lids
PLC: S7-300/ HMI panel: TP177/ Profibus/ RFID: MOBY/ Dosage glue system: DoBoTech
Writing PLC code in STEP7 and making visualization in WINCC, commissioning and optimalization.

- Automatic pressing station of the four bearings and one pillow block for the AGW engine and automatic pressing station of the balance shaft and the gear in the AGW engine
PLC: S7-300/ HMI panel: MP277/ Profibus/ Profinet/ Servomotors Sinamics/ RFID: MOBY/ KUKA robots KR-16 and KR AGILUS/ Measuring and press system: Kistler DMF-P A400, press servomotors NCFH type 2151B with IndraDrive Servocontroller
Writing PLC code for half of station, configuring 2 servomotors sinamics, making communication PLC <-> Robots, commissioning and optimalization PLC code, making visualization for HMI panel in WinCC.

-Automatic pressing station of two gearwheel for the crankshaft of MDB AGW motors.
PLC: S7-300F/ HMI panel: MP277/ Profinet/ RFID: MOBY/ KUKA robot KR AGILUS/ Measuring and press system: Kistler DMF-P A400, TOX-PESSOTECHNIK Q-K2 with force sensor 9343A and distance sensor TRS 0-50/ Induction heating system: HIMMEL
Configuring and programming robot KUKA, writing PLC code for write and read data on MOBY RFID, writing PLC code for press process technology (KISTLER press system), making visualization for HMI panel in WInCC.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), SIMATIC S7, STEP 7, Graph7, Kontaktplan (KOP), Robotik / Robotertechnik

Zertifikate

TURCK, Programmable modules BL20/BL67, HMI panels with PLC function- the possibility of using in RFID aplications
2015
TURCK, Banner safety systems in integration with Safety Controller SC/XS26
2015
SICK, FA205 Valid safety rules
2015
SICK, FA208 Programmable Controllers FlexiSoft
2015
SIEMENS, SINAMICS S120- service and commissioning
2014
KUKA, Robot programming 1- software version KSS.8.x (KR C4)
2013
SIEMENS, Profibus, Profinet network
2013
Operation and programming Kawasaki robots- course for integrators
2013

Weitere Kenntnisse

• Programming PLC System: Siemens
• Knowledge of programming PLC System: OMRON, GE Fanuc
• Programming and configuring robots: ABB, KUKA, FANUC, KAWASAKI, MOTOMAN, EPSON SCARA
• Programming HMI panels: Siemens, Weintek
• Electric permission 30kV
• Programming and configuring Sinamics S120/ G120, SEW drives
• Programming and configuring Cognexs scanners, Keyence scanners and cameras, SICK cameras and scanners
• Programming and configuring Bosh/ Atlas Copco/ Cleco tightening system, Promess/ Kistler press system, Himmel heating system, ATEQ leak system

Persönliche Daten

Sprache
  • Polnisch (Muttersprache)
  • Englisch (Fließend)
  • Deutsch (Grundkenntnisse)
Reisebereitschaft
Weltweit
Arbeitserlaubnis
  • Europäische Union
  • Schweiz
  • Vereinigte Staaten von Amerika
Profilaufrufe
5630
Alter
36
Berufserfahrung
16 Jahre und 11 Monate (seit 04/2007)
Projektleitung
10 Jahre

Kontaktdaten

Nur registrierte PREMIUM-Mitglieder von freelance.de können Kontaktdaten einsehen.

Jetzt Mitglied werden