Automation engineer

7/2017 – 9/2017

- Reprogramming PLC logic and HMI according client requests (Siemens Step7 and WinCC Flexible).
- Run tests according functional design specification and run production test.

STEP 7

10/2016 – 6/2017

- Reprogramming PLC logic and SCADA according client requests (Siemens PCS7).
- Loops and I/O checks, setting up range and setpoints for instrumentation and control equipment.
- Run tests according functional design specification and run production test.
- Setup and test Modbus communication.

Supervisory control and data acquisition (SCADA), Simatic (allg.), SIMATIC S7

5/2016 – 10/2016

- STEP7 programming to implement logic for loading / unloading tanks and mixing sequence.
- Implementation logic for product transfer between tanks or to load trucks.
- HMI Design and programming operator panels for process control.

Automatisierungstechnik (allg.), Supervisory control and data acquisition (SCADA), SIMATIC S7

2/2016 – 5/2016

- Design and programming SCADA system for data acquisition from pumps stations.
- Configuration of OPC server for communications with Siemens PLC

Supervisory control and data acquisition (SCADA), OPC unified architecture (OPC-UA), Totally integrated automation portal (TIA portal)

6/2013 – 7/2016

- Design and realization of PLC programming software for PCS (Process Control Systems) – Hardware: S7-400 CPU 417-5H.
- Configuration and programming of Profibus networks for connection of field devices (ROTORK, SIMOCODE, SINAMICS, PAC3200, VIPA, ET200).
- Configuration and implementation, in PLC software, communication with SICAM230 and SICAM PAS over 104 protocol.
- Offshore PLC systems commissioning for PCS (Process Control System), SGS (Safety Guarding System) and FGS (Fire and Gas System).
- Support commissioning engineers for checking signal loops and wiring.
- Programming operation modes for PMS (Power Management System).
- Reprogramming and implementing software changes required by the customer according to MOC’s or ECN’s.

Automatisierungstechnik (allg.), SIMATIC S7, STEP 7, Betriebsleittechnik

2/2013 – 6/2013

- Coordinating teams of electricians and mechanics for dismantling manufacturing lines for electric cables
- Providing assistance and advice for installation and commissioning production lines.
- Supervise, assist and monitor the work related.
- Startup and parameterization PLC software (SIMATIC PCS 7)

Automatisierungstechnik (allg.), Simatic (allg.), STEP 7, Totally integrated automation portal (TIA portal)

5/2012 – 2/2013

Client representative for start-up new factory for the manufacture of wood panels
- Check of the detailed engineering including fabrication and installation.
- Ensuring all work performed is made in compliance with client regulations and requirements.
- Following up punch work in the field and punch list documentation and clearance.
- Customer advice for necessary changes to achieve the desired results.

Automatisierungstechnik (allg.), Simatic (allg.), STEP 7, Elektrotechnik

11/2011 – 4/2012

- Design, programming PLC and HMI for loading control system and metering milk.
- Commissioning, assist and monitor the work related

Totally integrated automation portal (TIA portal)

5/2011 – 10/2011

Relocation line coating and UV drying wood panels
- Technical assistance to relocate the installations for coating and UV drying wood panels
- Reprogramming sequence of operation of the command line in the main PLC - Modicon TSX Premium with PL7 PRO 4.5
- Parameterization of painting and drying installations - OMRON PLC CH200 and Siemens S7 300, according to customer requirements

Automatisierungstechnik (allg.), STEP 7, Speicherprogrammierbare Steuerung (SPS)

8/2010 – 4/2011

Project: Automatic sorting line for wood blades for feeding cutting machines.
- Development control system design, programming and commissioning of system
- Programming software STEP 7 V5.4 and WinCC Flexible 2008

Project: Gluing and pressing line for wood panels.
- Programming and commissioning control system for various sizes of wood panels
- Hardware used OMRON PLC and operator panel NT600, programming with CX-Programmer and NT-ST4.7

Automatisierungstechnik (allg.), STEP 7, Speicherprogrammierbare Steuerung (SPS)

2/2010 – 8/2010

Designing, programming and commissioning PLC control system for concrete manufacturing facility.

SIMATIC S7

11/2008 – 4/2009

Reprogramming control logic according new requirements.

Simatic (allg.), SIMATIC S7

1/2008 – 10/2008

Designing, programming and commissioning of automatic control system for line for packing wood panels

STEP 7, Speicherprogrammierbare Steuerung (SPS)

1/2003 – 11/2007

- Design, configuration and programming of automation control systems with PLC and SCADA projects.
- Drafted of electrical schematics and designed control panel.
- Commissioning, startup and calibration instrumentation and control equipment to achieve effective results and fulfill quality requirements.
- Development of test and maintenance manuals for instrumentation and control equipment.
- Created operator's guide for industrial process real-time control.

Automatisierungstechnik (allg.), STEP 7, Technisches Projektmanagement, Projekt-Arbeitsvorbereitung

10/2001 – 11/2002

- Set-up tools, adjust and troubleshoot injection molding machines as well as auxiliary equipment and automation systems.
- Start-up/shut down injection molding machines, automation equipment and auxiliary equipment in accordance with the production schedule.
- Troubleshoot the equipment in order to produce a product which meets the quality standards required by the quality department.

Elektrotechnik

8/1997 – 8/2001

- Developed and debug codes for industrial automatisation with PLC like Siemens (S5 and S7 series), OMRON (CPM2, CQM1, and C200H series) and Schneider (PLC-5 series).
- Maintained and troubleshoot instrumentation and control equipment, drives and motor controls, also ensuring the quick recover in case of emergency.
- Involved in SCADA systems performance analysis and troubleshooting, real time control and PID algorithm development.

Automatisierungstechnik (allg.), Supervisory control and data acquisition (SCADA), SIMATIC S5, STEP 7, Speicherprogrammierbare Steuerung (SPS)