freiberufler Automation engineer auf freelance.de

Automation engineer

zuletzt online vor wenigen Stunden
  • auf Anfrage
  • 720237 IASI, Romania
  • Weltweit
  • ro  |  en
  • 02.03.2024

Kurzvorstellung

PLC programmer/ Commissioning engineer.

Qualifikationen

  • Automatisierungstechnik (allg.)
  • PCS7
  • SIMATIC S7
  • Speicherprogrammierbare Steuerung (SPS)
  • STEP 7
  • Supervisory control and data acquisition (SCADA)
  • Totally integrated automation portal (TIA portal)

Projekt‐ & Berufserfahrung

Control system engineer/ PLC Programmer
Principle Power Inc, France, Marseille
5/2022 – 4/2023 (1 Jahr)
Bauwirtschaft, Anlagen- und Schiffbau
Tätigkeitszeitraum

5/2022 – 4/2023

Tätigkeitsbeschreibung

Design, programming and testing PLC programming for control and monitoring wind turbines (Tia Portal v 17.0)
(Hardware S7 1500 CPU 1517H-3 PN, redundant system)

Eingesetzte Qualifikationen

Totally integrated automation portal (TIA portal)

Automation engineer
PAVIS Engineering GmbH, Remote
3/2022 – 5/2022 (3 Monate)
Dairy factory
Tätigkeitszeitraum

3/2022 – 5/2022

Tätigkeitsbeschreibung

Testing and troubleshooting PLC software and logic of the elution process for the dairy factory.

Eingesetzte Qualifikationen

STEP 7

Automation engineer
AMBRO S.A., Suceava
8/2021 – offen (2 Jahre, 8 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

8/2021 – offen

Tätigkeitsbeschreibung

Project: Waste incineration control and monitoring system
• Design of waste transport control system and combustion monitoring (S7-1200, Tia Portal v16)
• Acquisition of data from weighing systems (communication: Profibus and RS232)

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), Supervisory control and data acquisition (SCADA), Totally integrated automation portal (TIA portal)

Automation engineer
AMBRO SA, Suceava
1/2021 – 6/2021 (6 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

1/2021 – 6/2021

Tätigkeitsbeschreibung

Project: Update and modification of transport and sorting paper waste system. (from S5 to S1200)
• Conversion of PLC program, implement new function and design HMI interface (Simatic STEP 5 and TiaPortal v16)
• Replace PLC and rewiring control cabinet
• Run tests according functional design specification and run production test

Eingesetzte Qualifikationen

Simatic (allg.), Totally integrated automation portal (TIA portal)

PCS7 Commissioning Engineer/ Automation engineer
PETROFAC, BORWIN GAMA - Offshore HVDC platform, North Sea
1/2019 – 12/2020 (2 Jahre)
Bauwirtschaft, Anlagen- und Schiffbau
Tätigkeitszeitraum

1/2019 – 12/2020

Tätigkeitsbeschreibung

• Support commissioning engineers for checking signal loops and wiring, calibration of instrumentation and control equipment.
• Configuration and programming of Profibus and Profinet networks for connection of field devices
• Reprogramming and implementing software changes required by the customer according to MOC’s or ECN’s. (Simatic PCS7, TiaPortal V14)
• Offshore PLC systems commissioning for PCS (Process Control System), SGS (Safety Guarding System) and FGS (Fire and Gas System)

Eingesetzte Qualifikationen

Simatic (allg.), SIMATIC S7, STEP 7, Teamcenter (Siemens PLM Software)

PCS7 Commissioning Engineer
NUKEM Technologies, Lianyun District, PR. China
4/2018 – 12/2018 (9 Monate)
Maschinen-, Geräte- und Komponentenbau
Tätigkeitszeitraum

4/2018 – 12/2018

Tätigkeitsbeschreibung

Radwaste Treatment Center, Jiangsu Nuclear Power Company Ltd.,
• Loops and I/O checks, calibration of instrumentation and control equipment.
• Reprogramming PLC logic and SCADA according new design and client requests (Siemens PCS7).
• Run tests according functional design specification.

Eingesetzte Qualifikationen

STEP 7, Supervisory control and data acquisition (SCADA), Totally integrated automation portal (TIA portal)

PLC programming and commissioning
AMBRO SA, Suceava
12/2017 – 2/2018 (3 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

12/2017 – 2/2018

Tätigkeitsbeschreibung

- Conversion of PLC program, implement new function and redesign HMI interface
- Replace PLC and rewiring control cabinet
- Run tests according functional design specification and run production test

Eingesetzte Qualifikationen

SIMATIC S5, SIMATIC S7, Totally integrated automation portal (TIA portal), Elektrotechnik

PCS7 Commissioning Engineer
KraussMaffei Berstorff, Inner Mongolia
10/2017 – 11/2017 (2 Monate)
Dienstleistungsbranche
Tätigkeitszeitraum

10/2017 – 11/2017

Tätigkeitsbeschreibung

- Reprogramming PLC logic and SCADA according new design and client requests (Siemens PCS7).
- Checking and fix open points list from customer.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), Elektrotechnik, Speicherprogrammierbare Steuerung (SPS)

PLC Programming & Commissioning
TMS Turnkey Manufacturing Solutions GmbH, Austria, General Motors Poland
7/2017 – 9/2017 (3 Monate)
Automobilindustrie
Tätigkeitszeitraum

7/2017 – 9/2017

Tätigkeitsbeschreibung

- Reprogramming PLC logic and HMI according client requests (Siemens Step7 and WinCC Flexible).
- Run tests according functional design specification and run production test.

Eingesetzte Qualifikationen

STEP 7

PCS7 Commissioning Engineer
KraussMaffei Berstorff, Inner Mongolia
10/2016 – 6/2017 (9 Monate)
Chemieindustrie
Tätigkeitszeitraum

10/2016 – 6/2017

Tätigkeitsbeschreibung

- Reprogramming PLC logic and SCADA according client requests (Siemens PCS7).
- Loops and I/O checks, setting up range and setpoints for instrumentation and control equipment.
- Run tests according functional design specification and run production test.
- Setup and test Modbus communication.

Eingesetzte Qualifikationen

Supervisory control and data acquisition (SCADA), Simatic (allg.), SIMATIC S7

PLC Programmer
EUROMAR, Fehrbellin
5/2016 – 10/2016 (6 Monate)
Food industry
Tätigkeitszeitraum

5/2016 – 10/2016

Tätigkeitsbeschreibung

- STEP7 programming to implement logic for loading / unloading tanks and mixing sequence.
- Implementation logic for product transfer between tanks or to load trucks.
- HMI Design and programming operator panels for process control.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), Supervisory control and data acquisition (SCADA), SIMATIC S7

SCADA programmer
City water services, Corbeanca
2/2016 – 5/2016 (4 Monate)
Versorgungswirtschaft
Tätigkeitszeitraum

2/2016 – 5/2016

Tätigkeitsbeschreibung

- Design and programming SCADA system for data acquisition from pumps stations.
- Configuration of OPC server for communications with Siemens PLC

Eingesetzte Qualifikationen

Supervisory control and data acquisition (SCADA), OPC unified architecture (OPC-UA), Totally integrated automation portal (TIA portal)

PLC Programmer/ Commisionig PLC Engineer
Technomatic GmbH, Maxdorf
6/2013 – 7/2016 (3 Jahre, 2 Monate)
Power energy
Tätigkeitszeitraum

6/2013 – 7/2016

Tätigkeitsbeschreibung

- Design and realization of PLC programming software for PCS (Process Control Systems) – Hardware: S7-400 CPU 417-5H.
- Configuration and programming of Profibus networks for connection of field devices (ROTORK, SIMOCODE, SINAMICS, PAC3200, VIPA, ET200).
- Configuration and implementation, in PLC software, communication with SICAM230 and SICAM PAS over 104 protocol.
- Offshore PLC systems commissioning for PCS (Process Control System), SGS (Safety Guarding System) and FGS (Fire and Gas System).
- Support commissioning engineers for checking signal loops and wiring.
- Programming operation modes for PMS (Power Management System).
- Reprogramming and implementing software changes required by the customer according to MOC’s or ECN’s.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), SIMATIC S7, STEP 7, Betriebsleittechnik

Automation Engineer/ Team leader
GG Cables & Wires, Poysdorf
2/2013 – 6/2013 (5 Monate)
Automobilindustrie
Tätigkeitszeitraum

2/2013 – 6/2013

Tätigkeitsbeschreibung

- Coordinating teams of electricians and mechanics for dismantling manufacturing lines for electric cables
- Providing assistance and advice for installation and commissioning production lines.
- Supervise, assist and monitor the work related.
- Startup and parameterization PLC software (SIMATIC PCS 7)

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), Simatic (allg.), STEP 7, Totally integrated automation portal (TIA portal)

Head of technical department
AVIVA SRL (supplier IKEA), Sighetul Marmatiei
5/2012 – 2/2013 (10 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

5/2012 – 2/2013

Tätigkeitsbeschreibung

Client representative for start-up new factory for the manufacture of wood panels
- Check of the detailed engineering including fabrication and installation.
- Ensuring all work performed is made in compliance with client regulations and requirements.
- Following up punch work in the field and punch list documentation and clearance.
- Customer advice for necessary changes to achieve the desired results.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), Simatic (allg.), STEP 7, Elektrotechnik

PLC/HMI Programmer and commissioning
Prolacta SRL, Suceava
11/2011 – 4/2012 (6 Monate)
Food industry
Tätigkeitszeitraum

11/2011 – 4/2012

Tätigkeitsbeschreibung

- Design, programming PLC and HMI for loading control system and metering milk.
- Commissioning, assist and monitor the work related

Eingesetzte Qualifikationen

Totally integrated automation portal (TIA portal)

Automation Engineer
AVIVA SRL (supplier IKEA), Sighetul Marmatiei
5/2011 – 10/2011 (6 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

5/2011 – 10/2011

Tätigkeitsbeschreibung

Relocation line coating and UV drying wood panels
- Technical assistance to relocate the installations for coating and UV drying wood panels
- Reprogramming sequence of operation of the command line in the main PLC - Modicon TSX Premium with PL7 PRO 4.5
- Parameterization of painting and drying installations - OMRON PLC CH200 and Siemens S7 300, according to customer requirements

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), STEP 7, Speicherprogrammierbare Steuerung (SPS)

PLC/HMI Programmer and commissioning
HOLZINDUSTRIE SCHWEIGHOFER SRL, Suceava
8/2010 – 4/2011 (9 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

8/2010 – 4/2011

Tätigkeitsbeschreibung

Project: Automatic sorting line for wood blades for feeding cutting machines.
- Development control system design, programming and commissioning of system
- Programming software STEP 7 V5.4 and WinCC Flexible 2008

Project: Gluing and pressing line for wood panels.
- Programming and commissioning control system for various sizes of wood panels
- Hardware used OMRON PLC and operator panel NT600, programming with CX-Programmer and NT-ST4.7

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), STEP 7, Speicherprogrammierbare Steuerung (SPS)

Concrete manufacturing plant
HIDROTERRA SA, Suceava
2/2010 – 8/2010 (7 Monate)
Bauwirtschaft, Anlagen- und Schiffbau
Tätigkeitszeitraum

2/2010 – 8/2010

Tätigkeitsbeschreibung

Designing, programming and commissioning PLC control system for concrete manufacturing facility.

Eingesetzte Qualifikationen

SIMATIC S7

PLC Programmer
CROCO SA, Onesti
11/2008 – 4/2009 (6 Monate)
Food industry
Tätigkeitszeitraum

11/2008 – 4/2009

Tätigkeitsbeschreibung

Reprogramming control logic according new requirements.

Eingesetzte Qualifikationen

Simatic (allg.), SIMATIC S7

PLC/HMI Programmer and commissioning
Swedwood, Suceava
1/2008 – 10/2008 (10 Monate)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

1/2008 – 10/2008

Tätigkeitsbeschreibung

Designing, programming and commissioning of automatic control system for line for packing wood panels

Eingesetzte Qualifikationen

STEP 7, Speicherprogrammierbare Steuerung (SPS)

Technical Manager
ARIOS SRL, Suceava
1/2003 – 11/2007 (4 Jahre, 11 Monate)
Dienstleistungsbranche
Tätigkeitszeitraum

1/2003 – 11/2007

Tätigkeitsbeschreibung

- Design, configuration and programming of automation control systems with PLC and SCADA projects.
- Drafted of electrical schematics and designed control panel.
- Commissioning, startup and calibration instrumentation and control equipment to achieve effective results and fulfill quality requirements.
- Development of test and maintenance manuals for instrumentation and control equipment.
- Created operator's guide for industrial process real-time control.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), STEP 7, Technisches Projektmanagement, Projekt-Arbeitsvorbereitung

Maintenance Technician
Art Mould Plastics Ltd, Toronto
10/2001 – 11/2002 (1 Jahr, 2 Monate)
Automobilindustrie
Tätigkeitszeitraum

10/2001 – 11/2002

Tätigkeitsbeschreibung

- Set-up tools, adjust and troubleshoot injection molding machines as well as auxiliary equipment and automation systems.
- Start-up/shut down injection molding machines, automation equipment and auxiliary equipment in accordance with the production schedule.
- Troubleshoot the equipment in order to produce a product which meets the quality standards required by the quality department.

Eingesetzte Qualifikationen

Elektrotechnik

Automation Engineer
AMBRO SA, Suceava
8/1997 – 8/2001 (4 Jahre, 1 Monat)
Metall-, Holz- und Papierindustrie
Tätigkeitszeitraum

8/1997 – 8/2001

Tätigkeitsbeschreibung

- Developed and debug codes for industrial automatisation with PLC like Siemens (S5 and S7 series), OMRON (CPM2, CQM1, and C200H series) and Schneider (PLC-5 series).
- Maintained and troubleshoot instrumentation and control equipment, drives and motor controls, also ensuring the quick recover in case of emergency.
- Involved in SCADA systems performance analysis and troubleshooting, real time control and PID algorithm development.

Eingesetzte Qualifikationen

Automatisierungstechnik (allg.), Supervisory control and data acquisition (SCADA), SIMATIC S5, STEP 7, Speicherprogrammierbare Steuerung (SPS)

Zertifikate

GWO Sea survival course
2022
GWO First Aid course
2022
FOET (Basic Offshore Safety Induction and Emergency Training), Constanta, Romania
2022
PLC's SIMATIC S7 (ST-7 PRO3) SIMATIC Training Centre
2013
PLC's SIMATIC S7 (ST-7 PRO1 and ST-7 PRO2), SIMATIC Training Centre
2001
Postgraduate courses for computer programmers
1999
Radioprotection and Nuclear Security of nuclear technique installations for quality control
1998

Ausbildung

Technical University "Gh. Asachi"
Electronic and Telecommunications Faculty
1996
Iasi, Romania

Über mich

In-depth knowledge in PLC programming (LD, CFC/SFC, FBD, ST, IL) and HMI
Wide practical experience in program debugging and commissioning
Expertise in data acquisition, close/open loop control, servo drive systems
PID algorithms, real time control as well as interfacing with all kind of sensors, actuators and other electromechanical devices.
Design, configuration and programming of automation systems (SCADA, DCS, PLC, Operator panels)
Draft, develop and elaborate process instrumentation selection, control panels design, electrical schematics and wiring diagrams for control systems.
Commissioning, start-up and calibration of instrumentation equipment.
Develop and elaborate tests for maintenance and Operator´s Manuals
Consultancy for commissioning and maintenance engineers.

Weitere Kenntnisse

SIEMENS: Simatic Step 5, Step 7, PCS7, TIA-Portal, WinCC Flexible and WinCC
SIEMENS Drive: DRIVE ES, Simocode, Simotion, Sinamics, ...
OMRON: SysWin, CX ONE and NT-Series Support Tool
SCHNEIDER: PL7-Pro
MITSUBISHI: E-Designer
SCADA: Citec, DELTA-V, SICAM230
Communication interfaces / Protocols: IEC60870-5-104 Server & Client, Industrial TCP/IP, Profibus, Modbus, Fieldbus, S7 Com

Persönliche Daten

Sprache
  • Rumänisch (Muttersprache)
  • Englisch (Fließend)
Reisebereitschaft
Weltweit
Arbeitserlaubnis
  • Europäische Union
Profilaufrufe
4967
Alter
51
Berufserfahrung
26 Jahre und 7 Monate (seit 08/1997)
Projektleitung
3 Jahre

Kontaktdaten

Nur registrierte PREMIUM-Mitglieder von freelance.de können Kontaktdaten einsehen.

Jetzt Mitglied werden