Project Engineer, QA/QC , pre-commissioning & commissioning in oil and gas with mute-discipline extensive experience
- Verfügbarkeit einsehen
- 0 Referenzen
- auf Anfrage
- 2800 Mechelen
- Weltweit
- fr | nl | en
- 29.10.2018
Kurzvorstellung
Qualifikationen
Projekt‐ & Berufserfahrung
4/2015 – 12/2016
Tätigkeitsbeschreibung
Disciplines: Civil, Electrical MV/LV, Mechanical, LNG Piping, Instrumentation
Project: 2nd jetty LNG project for Fluxys
Equipment: HV transformer and cables, LNG Loading arms, Emergency Diesel pump, LNG Piping, LIN evaporation skid and tank, Gas analysis and sampling, crane and gangways, DCS system, Fire and gas, hydraulic skid
Related duties and responsibilities:
〉 Responsible for the preparation integration & planning with the contractor TSLNG on behalf of FLUXYS of all pre-commissioning, commissioning & RFSU activities for all equipment:
- LNG piping pressure testing until LNG piping cooldown, LIN tank and evaporation skid
- Fire water lines, Emergency Diesel pump
- LNG loading arms (SVT), crane & Gangways (Verhoef)
〉 Reviewing commissioning procedures
〉 Organise, follow-up and validate pre-commissioning commissioning activities.
〉 Assisting the pre-commissioning walkthrough and ensuring punch-items are solved or tracked.
〉 SIMOPS management
〉 Manage electrical, mechanical and piping close out (NDT, welding book, Law applicable inspection and reports)
〉 Responsible for overall commissioning of the gas analysis shelter supplied by OPTAPERIPH
Technisches Projektmanagement, Technische Projektleitung / Teamleitung
10/2014 – 1/2015
Tätigkeitsbeschreibung
Disciplines: Mechanical, Piping, Automation & Instrumentation
Project: New hydrogen filling station in Lilo ( Solvay site )
Equipment: H2 piping, H2 compressor, Fire and gas, Automated H2 filling system for trucks.
Related duties and responsibilities:
〉 Daily multi-discipline commissioning interventions on H2 plant observing strict HSE requirements due to Ex (explosive) zone & coordination with supplier and resolution follow-up.
〉 Ensure that all works are performed safely (LOTO, ATEX, Piping pressure testing)
〉 Hands-on commissioning of:
- 200 Bar H2 membrane Compressors
- PLC troubleshooting with assistance of Supplier
- Troubleshooting of compressed air piloted valve network
〉 Completing construction activities supervision & responsible for work permit & risk analysis
Technische Projektleitung / Teamleitung
1/2014 – 8/2014
Tätigkeitsbeschreibung
Disciplines: Structural, Electrical MV/LV, Mechanical, Piping, Automation & Instrumentation
Project: Top Lifting Module,; (TLM) Construction
Equipment: HVAC, 33kV switchgear, 11kV Switchgear, Fire and gas, metallic structure. Cooling system of subsea pump.
Related duties and responsibilities:
〉 Integration of ICAPS & OPERCOM methodology, organise, follow-up and validate pre-commissioning and onshore commissioning activities as defined in Total General Specification.
〉 Preparing commissioning procedures for integrated FAT testing on TLM vendor site.
〉 Ensure pre-commissioning & commissioning execution is performed as per specifications.
〉 Ensure construction close-out (NDT, material certificates, stress tests) is performed and documented for integration in ICAPS completion database
〉 Follow-up of construction activities related to ICAPS acceptance issue
Technisches Projektmanagement, Technische Projektleitung / Teamleitung
6/2012 – 11/2013
Tätigkeitsbeschreibung
Disciplines: Electrical HV/MV/LV, Mechanical, Steel construction (welding) and piping
Projects: 300 – 400 MW Electrical Offshore Substation construction project and for Humber gateway project, Amrumbank project & Butendiek project.
Equipment: HVAC, 155kV & 33kV switchgear, HV transformer, metallic structure, Fire and gas, metallic structure. Cooling system of subsea pump.
Related duties and responsibilities:
〉 Managing QA/QC activities for the JV Fabricom-GDFSUEZ - CG - Iemants - Deme
〉 Commissioning manager for the Fabricom-GDFSUEZ scope
〉 Close cooperation with construction for maintain customer required level completion
〉 Lead for FAT acceptance and interface with the end-customer
〉 Carbon steel and GRP tank construction follow-up until FAT with customer
〉 Organisation of FAT and SAT (integrated FAT) for Diesel Generators up to 1250 kVA, oil/water separator,
〉 GRP, Stainless steel, Carbon steel HDPE Piping construction follow-up
〉 Oil/water separator construction follow-up until final acceptance with customer
Technische Projektleitung / Teamleitung, Technisches Qualitätsmanagement / QS / QA
1/2010 – 11/2010
Tätigkeitsbeschreibung
Disciplines: electrical MV/LV, motor control
Areas in the aluminium smelter: Reduction area, compressor building, pumping-station, substations & service buildings
Equipment: LV ( 690 V) & MV 6,6 kV VFD and softstarter, direct on line motor control, pumps, roots compressors
Related duties and responsibilities:
〉 Planning & coordination of commissioning activities
〉 Review & approve commissioning procedures submitted by subcontractor
〉 Lead system delivery from prestart-up safety review, performance test up to final acceptance
〉 Configuration execution, validation & troubleshooting on LV & MV motor control & protection
〉 VFD, soft starter & pump control electrical motor configuration, start-up & commissioning
〉 PLC & Instruments configuration for interface with VFD & DOL motor control
〉 Feedback and follow-up of construction required changes
Technische Projektleitung / Teamleitung, Technisches Testmanagement / Testkoordination
9/2008 – 12/2009
Tätigkeitsbeschreibung
Disciplines: Civil, mechanics, piping, welding, HVAC, electrical & instrumentation
Areas of Aluminium smelter: cathode rodding, service buildings & electrical substations
Equipment: Induction furnace, hydraulic piping and equipment, VFD, Fire and gas, HV transformer.
Related duties and responsibilities:
〉 Planning, coordination and reporting of QA/QC activities
〉 Coordination with construction team and subcontractor in avoiding non-conformance to specifications and solve NCR reports
〉 Validation of QA/QC protocol documents (NCR, ITP)
〉 Evaluation, with support of engineering group, of technical issues and Non-conformity reports
〉 Coordination of mechanical completion process using Procosys from Norsk Hydro
〉 Verification on-site of test protocol application according to specifications
〉 Guidance, advice and support assistance to project & construction management, contractor's management, superintendents and foremen
〉 Welding process follow up with team
〉 Hydraulic (oil/water) & gas piping construction (Carbon & stainless steel/ stainless steel quality follow-up (ITP, NCR)
〉 Steel structure construction for building follow-up including cladding and insulation
Technische Projektleitung / Teamleitung, Technisches Qualitätsmanagement / QS / QA
3/2006 – 7/2008
Tätigkeitsbeschreibung
Related duties and responsibilities:
〉 Lead for “Proof of Concept” of Alcatel fibre-to-the-user (FTTU) project in UAE with main local telecom operator Etisalat
〉 Coordination of network extension & commissioning of IPTV, Voice over IP & Unix systems
Coordination of installation and commissioning activities for telecom systems installed for non-telecom customers in electrical transportation, in substations or oil & gas. ( DEWA, ADEWA,SEWA in UAE, QP in Qatar , PDO)
Technisches Projektmanagement
2/2005 – 3/2006
TätigkeitsbeschreibungTendering
Eingesetzte QualifikationenProjektmanagement (IT), Festnetz / Telefonanlagen / Fax
12/1999 – 1/2005
Tätigkeitsbeschreibung
Alcatel Bell labs in Antwerp & International on customer’s location
Customer support expert May 2001-January 2005
Training consultant December 1999-April 2001
OSI (Open Systems Interconnection Model), TCP/IP, Telekommunikation / Netzwerke (allg.), Router, Cisco Switch, Schulung / Training (IT)
Zertifikate
Über mich
Weitere Kenntnisse
Persönliche Daten
- Französisch (Muttersprache)
- Niederländisch (Muttersprache)
- Deutsch (Grundkenntnisse)
- Englisch (Fließend)
- Europäische Union
Kontaktdaten
Nur registrierte PREMIUM-Mitglieder von freelance.de können Kontaktdaten einsehen.
Jetzt Mitglied werden