freiberufler Erbringung von Engineering- & Ingenieurdienstleitungen auf freelance.de

Erbringung von Engineering- & Ingenieurdienstleitungen

offline
  • auf Anfrage
  • 3043 Uettligen
  • nicht angegeben
  • de  |  en  |  fr
  • 05.09.2018

Kurzvorstellung

Keine Kurzvorstellung angegeben.

Auszug Referenzen (1)

"Low cost high precision tube
joints."
Mitinhaber
Bruno Piai, Piai Engineering
Tätigkeitszeitraum

7/2007 – 1/2011

Tätigkeitsbeschreibung

Das Projekt läuft noch. Weitere Informationen & Informationsmaterial auf Anfrage.

Qualifikationen:
Cooperation for developing an
automatically cutting and welding process
for construction tubes.

Preconditions for automated
component fabrication.
The fabrication process have to be adapted
to the conditions of automatically welding.
Therefore at first the penetration curve of the
tubes have to be cut automatically and much
more precisely than known as now.
The welding process has to be developed to
a most possible automation grade regarding
the offshore quality requests.
In order to reach this aims several trials had
been made.

State of practical trials
Developing of a demonstrator for completely
automated cutting and welding.
Developing an automated welding
process in laboratory.

Welding trials
Robot welded V- seam in 3G- position
on plates (300 x 300x15 mm);
material S355 EMZ (offshore steel)
Result:
DNV- certified
welding process.

State of Process
The measuring process is partly ready developed
The cutting process is ready developed to cut the
designed shape automatically.
First trials with the shape correction had occurred.

Further steps
Developing and construction of a new trial system
regarding the results made on the old demonstrator:
Integrated concept for process steps.
Ongoing development of measuring and
cutting correction process.
Consequent specification of the trial
system with focus on series- production.
Welding trials on original joints.

Quality advantages
Reproducible quality certifiable process.
Non destructible testing possible both ultrasonic and
X- ray.
Full range laboratory testing possible for low costs.
Automatically documentation and traceability of all
cutting and welding parameters for each joint.
Optical control of root possible from inside.
Inside coating possible.

Qualifikationen

  • Anlagenbau
  • Maschinenbau

Projekt‐ & Berufserfahrung

Mitinhaber
TKT Projects, Deutschland, Großbritanien, Schweiz
7/2007 – 1/2011 (3 Jahre, 7 Monate)
nicht angegeben
Tätigkeitszeitraum

7/2007 – 1/2011

Tätigkeitsbeschreibung

Das Projekt läuft noch. Weitere Informationen & Informationsmaterial auf Anfrage.

Qualifikationen:
Cooperation for developing an
automatically cutting and welding process
for construction tubes.

Preconditions for automated
component fabrication.
The fabrication process have to be adapted
to the conditions of automatically welding.
Therefore at first the penetration curve of the
tubes have to be cut automatically and much
more precisely than known as now.
The welding process has to be developed to
a most possible automation grade regarding
the offshore quality requests.
In order to reach this aims several trials had
been made.

State of practical trials
Developing of a demonstrator for completely
automated cutting and welding.
Developing an automated welding
process in laboratory.

Welding trials
Robot welded V- seam in 3G- position
on plates (300 x 300x15 mm);
material S355 EMZ (offshore steel)
Result:
DNV- certified
welding process.

State of Process
The measuring process is partly ready developed
The cutting process is ready developed to cut the
designed shape automatically.
First trials with the shape correction had occurred.

Further steps
Developing and construction of a new trial system
regarding the results made on the old demonstrator:
Integrated concept for process steps.
Ongoing development of measuring and
cutting correction process.
Consequent specification of the trial
system with focus on series- production.
Welding trials on original joints.

Quality advantages
Reproducible quality certifiable process.
Non destructible testing possible both ultrasonic and
X- ray.
Full range laboratory testing possible for low costs.
Automatically documentation and traceability of all
cutting and welding parameters for each joint.
Optical control of root possible from inside.
Inside coating possible.

Projektleiter Offshore
innoVent GmbH, Varel
7/2007 – 4/2010 (2 Jahre, 10 Monate)
nicht angegeben
Tätigkeitszeitraum

7/2007 – 4/2010

Tätigkeitsbeschreibung

Projektleiter

Machbarkeitsstudie über das Gesamtprojekt.
Verantwortung als eigenständiger Projektleiter mit einem Gesamtvolumen von 95 Mio. .
Entwicklung & Auslegung von Fabrikationsprozessen für Offshore Gründungskörper.


Qualifikationen:
Machbarkeitsstudie über das Gesamtprojekt.
Verantwortung als eigenständiger Projektleiter mit einem Gesamtvolumen von 95 Mio. .
Entwicklung & Auslegung von Fabrikationsprozessen für Offshore Gründungskörper.
Entwicklung der Verfahrensabläufe und Automatisation in der Robotertechnik.
Entwicklung & Auslegung im Vorrichtungsbau für die Prozessläufe.
F&E in Werkstoffbestimmungen, neuen Schweißprozessen, neue Korrosionsschutzmaßnahmen.
Verhandlungen und Vertragsabschlüsse mit Subunternehmer und Liefernten.
Verhandlungen mit entsprechenden Wirtschaftsministerien über Erbbaurechtsverträge.
Verhandlungen mit entsprechenden Wirtschaftsministerien über Fördermittel.
Verhandlungen mit entsprechenden Banken.
Aktive Mitarbeit am Businessplan.
Erstellung von Lasten- und Pflichtenheften.
Recruitment neuer Mitarbeiter.
Technische Assistenz und Vertriebsberatung für Neukunden.
Reisetätigkeit ca. 10%.

Projektleiter
dasag Renewable Energy AG, Zürich, Zürich
10/2006 – 8/2007 (11 Monate)
nicht angegeben
Tätigkeitszeitraum

10/2006 – 8/2007

Tätigkeitsbeschreibung

Projektleiter

Qualifikationen:
Entwicklung & Auslegung von Holzvergaseranlagen.
Verhandlungen und Abschlüsse mit Unterlieferanten.
Bauleitung und Inbetriebnahme der Anlage Wila (Schweiz).
Technische Assistenz und Vertriebsberatung mit Neukunden.
Reisetätigkeit ca. 40%.

Freelancer Turn Key power Plants
MAN B&W Diesel AG, Augsburg, Augsburg
3/2000 – 9/2006 (6 Jahre, 7 Monate)
nicht angegeben
Tätigkeitszeitraum

3/2000 – 9/2006

Tätigkeitsbeschreibung

Freelancer

Entwicklung & Auslegung von Dieselbetrieben Kraftwerksanlagen im Turn Key.
Verhandlungen und Abschlüsse für Wartungsverträge für Kraftwerksanlagen sowie Seeschiffe.
Technische Assistenz und Schulung für MAN Service Ingenieure.
Reisetätigkeit ca. 15%.


Qualifikationen:
Entwicklung & Auslegung von Dieselbetrieben Kraftwerksanlagen im Turn Key.
Verhandlungen und Abschlüsse für Wartungsverträge für Kraftwerksanlagen sowie Seeschiffe.
Technische Assistenz und Schulung für MAN Service Ingenieure.
Reisetätigkeit ca. 15%.

March 2000

Design, development and project process for stationary power plants as turn key including power barges up to 270 MW bulk power for upstream four-stroke cycle diesel engines operated with HFO.

Design, development and project process for steam systems for stationary power plants.

Design, development and project process for flue gas scrubber and catalysts for stationary power plants. Operation systems for flue gas scrubbers: Wet Method, Half-Dry- and Dry Method.

Design, development and project process for tank farm for stationary power plants.

Design, development and project process for fire protection plants for stationary power plants.

Design, development and project process for steel construction for stationary power plants and power barges.

Including from April 2003 until 2006

Technical and commercial preparation, tender preparation including conduct of negotiation with clients for contract conclusion for 1st class maintenance service and also operation and maintenance contracts (O&M) for stationary power plants and cruise liner.

Technical assistance for MAN-Service-Engineers at site and in the head office Augsburg for stationary power plants, cruise liner and cargo vessels.

Freelancer Technical manager
Saint Vincent Brewery LTD, Kingstown, Kingstown
1/1997 – 1/2000 (3 Jahre, 1 Monat)
nicht angegeben
Tätigkeitszeitraum

1/1997 – 1/2000

Tätigkeitsbeschreibung

Freelancer / Technical Manager

Aufbau und Inbetriebnahme der Brauerei
Technischer Leiter des Produktionsbetriebes
Personalschulung der Mitarbeiter.

Qualifikationen:
Aufbau und Inbetriebnahme der Brauerei
Technischer Leiter des Produktionsbetriebes
Personalschulung der Mitarbeiter.

Strukturiert war der Aufbau der Brauerei, die Inbetriebnahme und die Produktion in folgende Bereiche:
- Position als Projektleiter vor Ort mit dem Aufgabenbereich: Aufbau der Brauerei
- Position als Inbetriebnahme-Ingenieur der Anlage mit allen Komponenten
- Position als Technical Manager während des Produktionsbetriebes

Verantwortungsbereiche

- mechanische Werkstätten
- elektrische Werkstatt
- Schreinerei
- Maschinenhaus
- Sudhaus
- Labor (Geräte)
- Kühlhäuser
- Abfüllanlagen
- Tankanlagen
- Siloanlagen
- Lager
- Dampfsysteme mit Wasseraufbereitungsanlagen
- Kläranlagen
- Gebäudeunterhaltung
- Betriebsareal-Unterhaltung
- Fuhrpark

Über mich

Erbringung von Engineering- und Ingenieurdienstleistungen für erneuerbare Energien; Entwicklung und Auslegung von dieselmotorbetriebenen Kraftwerksanlagen im Turnkey.

Mehr Detailinformationen auf Anfrage.


Weitere Kenntnisse

Technik & Ingenieursberufe
- Sondermaschinenbau

Persönliche Daten

Sprache
  • Deutsch (Muttersprache)
  • Englisch ()
  • Französisch ()
  • Italienisch ()
Arbeitserlaubnis
  • Europäische Union
Home-Office
bevorzugt
Profilaufrufe
2133
Alter
72
Berufserfahrung
48 Jahre (seit 1976)
Projektleitung
20 Jahre

Kontaktdaten

Nur registrierte PREMIUM-Mitglieder von freelance.de können Kontaktdaten einsehen.

Jetzt Mitglied werden