freiberufler Automation Engineer auf freelance.de

Automation Engineer

zuletzt online vor wenigen Tagen
  • 50€/Stunde
  • 32832 Ostring 23
  • Weltweit
  • en
  • 19.07.2022

Kurzvorstellung

Over Sixteen years of extensive automation/electrical experience ,Good understanding of 840D CNC and PLC s7-300 ,
s7-1500 system including programming ,Parameter fine tuning for the servo system and good at Siemens PLC software TIA
optimization.

Ich biete

  • Elektrische Inbetriebnahme
  • Software engineering / -technik

Projekt‐ & Berufserfahrung

Software Engineer
Shanghai Qizhen, Wiel
4/2018 – 1/2022 (3 Jahre, 10 Monate)
Maschinen-, Geräte- und Komponentenbau
Tätigkeitszeitraum

4/2018 – 1/2022

Tätigkeitsbeschreibung

Working as an software engineer for the installation and commissioning of Gantry system, cross portal and washing
machine for automobile industry including power train, body in white workshop.
Mainly focus on the following work:
I/O check of electrics, pneumatic and or hydraulics incl. respective corrections, commissioning of Profinet system, commissioning of emergency circuit, commissioning of single functions either motorized, or pneumatic and hydraulic
driven, checking and commissioning of drives as well as friction run, calibration of encoders and sensors, functional
test of automatic functions.
Programming of S7-1500 PLC system and S120 drive system By Software TIA and Starter.
Robotics application including interface definition , hardware configuration, position teaching ,
basic programming and trouble shooting,

Eingesetzte Qualifikationen

Software engineering / -technik

Software commissioning Engineer
Fibro, Wiel
3/2013 – 4/2018 (5 Jahre, 2 Monate)
Maschinen-, Geräte- und Komponentenbau
Tätigkeitszeitraum

3/2013 – 4/2018

Tätigkeitsbeschreibung

Working as an PLC and NC software commissioning engineer on site responsible for commissioning and startup of the
Gantry control system used for automatic loading/unloading machined parts in Power train workshop of Automotive
industry. The Gantry control system is based on Siemens 840D NC system ,S7 PLC system and also Sinamics 120 for
driving the Axes,
Daily work for FLT.
1: PLC and NC programming ,Parameter fine tuning for Servo system and HMI programming based on Wincc flexible software.
2: Installation and Commissioning of CNC control system and communication with customer IT system like
data structure and data process. (RFID, server)
3: Provide maintenance, operating and basic programming training to customer

Eingesetzte Qualifikationen

Elektrische Inbetriebnahme

Electrical service Engineer
Kampf Machinery, Siegen
5/2008 – 3/2013 (4 Jahre, 11 Monate)
Maschinen-, Geräte- und Komponentenbau
Tätigkeitszeitraum

5/2008 – 3/2013

Tätigkeitsbeschreibung

During the working time in this company, I was mainly responsible for commissioning and trouble shooting of electrical
control system. The automation system is motion and torque control system based on Siemens S7-400 and use Beckhoff
industrial PC as the HMI at the same time use high class servo system like Masterdrive or Sinamics 120 for driving the
winder, unwind and the positioning system, the speed and torque set point of drives get from S7-400 by Profibus
communication loop. For keeping the tension constant this machine also use Symadyn-D or FM458 for the calculation of dynamic diameter and length of running materials due to high speed.
I also participated in the work for machine localization. This work was mainly including select of electrical parts,
warehouse management and the software programming, at last finish the machine startup.

Eingesetzte Qualifikationen

Elektrische Inbetriebnahme

Qualifikationen

Over Sixteen years of extensive automation/electrical experience ,Good understanding of 840D CNC and PLC s7-300 ,
s7-1500 system including programming ,Parameter fine tuning for the servo system and good at Siemens PLC software TIA
optimization.
Be familiar with the Wincc flexible ,TIA Wincc software and HMI_PRO_CS for HMI Programming. Proficient in assembly
and C programming languages.
Knowledge about ABB and FANUC Robotics including interface definition , hardware configuration, position teaching ,
basic programming and trouble shooting,
Excellent communication skills with customer, colleagues, machine suppliers including write, verbal and interpersonal.

Über mich

I can offer a full range of machine Onsite installation and commissioningservices.We have a service team including software engineer, mechanical and electrical installation team,For the last five years, we are focusing onCarrying out installation and assembly work to high industrial standards and delivering a fast, meticulous and reliable service. Our project supervisors and site managers undertake installation projects for clients all over the world.
Plant commissioning and start-up is always overseen by our own team of specialists. Our project engineers are actively involved in this stage of the operation. Start-up monitoring, availability testing and process optimization are included as a matter of course so that new equipment can quickly be integrated into the production process.
Our services also include on-shift supervision by our own engineers and the training of clients’ operating and maintenance personnel.
Our partnership does not end with commissioning and start-up. We continue to offer a plant maintenance service and will undertake software and hardware modifications as and when needed for the production process.We provide on-call service with rapid remote diagnosis by our trained engineers – helping you to resolve your production stoppage problems with minimum delay.
Our engineers and technicianshave considerable experience in a number of different industries;
1, Production line in the power train. Reference Customer: Guedel, FLT
2,Body in white press line from automotive industry, Reference Customer: Schuler and Guedel.
3, Converting industry including slitting, winding machines for different materials like paper,plastic film, nonwoven,aluminum foil. Reference Customer: Kampf Machinery.

Persönliche Daten

Sprache
  • Englisch (Muttersprache)
Reisebereitschaft
Weltweit
Profilaufrufe
120
Alter
40
Berufserfahrung
17 Jahre und 11 Monate (seit 09/2004)
Projektleitung
8 Jahre

Kontaktdaten

Nur registrierte PREMIUM-Mitglieder von freelance.de können Kontaktdaten einsehen.

Jetzt Mitglied werden